HIAC PODS+ STD 2.3
HIAC PODS+ STD 2.3 portable liquid particle counters provide proactive and predictive maintenance information instantly. Sample low or high viscosity fluids and report data to ISO 4406, NAS 1638, NAVAIR, GOST, or SAE AS4059 reporting standards. With an integrated internal pump eliminating the need for CO2 cartridges, the HIAC PODS+ is highly portable with improved bubble degassing capabilities for virtually unlimited field sampling.
- Self-diagnostic alerts
- Sample recipe wizard
- Paperless workflows
|Performance||± 2.5% flow accuracy|
|Industry Standards||Counts / mL, GOST 17216-2001, ISO 4406, NAS 1638, NAVAIR 01-1A-17, Raw Counts, SAE AS 4059, User Specified, Upgrade options: DEFSTAN 91-91, ASTM D7619-12|
|Light Source||Light obscuration|
|Calibration Intervals and Options||1 year calibration: ISO-MTD|
|Particle Size Analysis Range||4 - 70 µm(c)|
|Coincidence Loss||5% at 40,000 particles/mL (per ISO-11171:2010 method)|
|Sample Volume||5 - 50 mL|
|Throughput||1 to 10 programmable (averaged)|
|Fluid Compatibility||Akso Fyrquel™, Alcohols, Aldehydes, Aromatics, Diesel fuel, Esters, Ethers, Jet fuel (JP4, JP5, & others), Kerosene, Ketones, MIL-H-5606, MIL-H-83282, Marston Bentley HW 540, Mineral oil, Mobile Zerol™ 150, Monsanto Coolanol™, Monsanto Skydrol™, Shell Tellis™, Stoddard Solvent, Water|
|Concentration Range||0 to 40000 particles/mL|
|Online Operation||No (Online Adapter Cup sold separately)|
|Tare Volumes||Bottle: 5-50 mL, Online: 5-999 mL|
|Data Storage||3,000 individual runs|
|Reporting||Internal printer, PDF, TSV, Raw counts, User-defined|
|Battery Operating Time||6 hours|
|Battery Recharge Time||4 hours|
|Wetted Materials||Chrome plated brass, PEEK, PTFE, FFKM, Sapphire, Stainless Steel|
|Zero Count||JIS B9925:1997|
|Counting Efficiency||Meets JIS B9925:1997|
|Count Alarms Display and Cycles||Count, particle percent difference, coincidence, system, calibration due, Flow or system alarms output through I/O port, Data Outputs: pdf, tsv over USB, custom Modbus protocol over Ethernet and RS232|
|Temperature Range||Charging temperature: limited to 40°C, Operating temperature range: 0 to 50°C, Fluid temperature range: 0 to 90°C (at 25°C ambient), Storage temperature range: -40 to +70°C|
|Humidity Restrictions||20-95% relative (non-condensing)|
|Power Requirements||DC Input: 24 VDC, 2.5 A maximum, 100-240 VAC, 50/60 Hz, 90 W|
|Operating Modes||Bottle/Online/Filter Cart|
|Weight||9.2 kg / 20.3 lb|
|Width||32 cm / 12.6 in|
|Depth||20.3 cm / 8 in|
|Height||42.5 cm / 16.7 in|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.