Thickwall Polypropylene Tube
Open-Top Thickwall Polypropylene Tube
For use in High Performance and High Capacity Rotors:
|•||JA-25.15 (Part Numbers 363050, 363054); Required Adapter: 303313|
For use in Ultracentrifuges Rotors:
|•||MLA-55 (Part Number 393203); Required Adapter: 303313|
|•||Type 90 Ti (Part Number 355530); Required Adapter: 303313|
|•||Type 70.1 Ti (Part Number 342184)|
|•||Type 70 Ti (Part Number 337922); Required Adapter: 303392|
|•||Type 50.4 Ti (Part Number 347299)|
|•||Type 50.2 Ti (Part Number 337901); Required Adapter: 303392|
|•||Type 45 Ti (Part Number 339160); Required Adapter:303449|
Note: This product replaces Part Numbers 355639 and 265916.
|Nominal Size||13 x 64mm||
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.