MET ONE 6015 Remote, Down Exhaust, Serial Interface, Flow Meter
The MET ONE 6015 offers accurate and reliable continuous particle monitoring and is easy to integrate into any facility monitoring system. With a sensitivity range of 0.3μM-10 μM, data accuracy and repeatability through ISO 21501 compliant calibration, the 6015 meets the specific needs of cleanroom operations within the pharmaceutical, semiconductor, hard disk drive and flat panel display industries. The long-life laser diode means years of service between replacement parts, plus industry leading diagnostic features that reduce troubleshooting time and related downtime costs.
This version of the 6015 has a flow rate of 1.0 CFM (2.83 LPM), sensitivity of 0.5 μM at 1.0 CFM (2.83 LPM) and a range of 0.3 μM to 10.0 μM at 0.1 CFM (2.83 LPM). Counting efficiency is 50% (± 20%) for 0.5 μM (100% ± 10% at 1.5 times the minimum sensitivity). Fully complies with ISO21501-4. Serial port RS-232 output. Includes down exhaust, flow and aa ASSY upgrade.
|Performance||ISO 21501-4 unit-to-unit accuracy & reproducibility|
|Industry Standards||ISO 21501-4 , ISO 14644-1:2015, FCC, CE|
|Light Source||Long Life Laser™ Diode|
|Particle Size Analysis Range||0.5 - 10 μm|
|Flow Rate||28.32 L per minute|
|Coincidence Loss||10% at 20,000,000 particles/m³|
|Sample Volume||10 µm|
|Throughput||28.32 L per minute|
|Interfaces & Protocols||RS-485, RS232, Modbus RTU Communication Protocol | FXB Communication Protocol|
|Data Storage||1,000 samples (oldest records overwritten when buffer is full)|
|Threshold Setting||0.5 µm|
|Zero Count||ISO 21501-4 & JIS B 9921 (1 count or less in 5 min; 95% UCL)|
|Count Alarms, Display & Cycles||User-defined alarm counts displayed via LED on box or remote LED|
|Environmental Conditions||Indoor Environment|
|Temperature Range||Operating temperature range: 10°C to 32°C, Storage temperature range: -40 to +70°C|
|Power Requirements||3.3 W, 9 to 28 VDC|
|Software||Integrates with various software platforms for facility monitoring|
|Operating Modes||Automated or remote sampling|
|Weight||0.8 kg(1.8 lb)|
|Width||13.6 cm(5.4 in)|
|Depth||8.9 cm(3.5 in)|
|Height||12.1 cm(4.8 in)|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.